STM Powersports Can-Am Maverick 1000 Turbo Tuner Secondary Clutch

STM Powersports Can-Am Maverick 1000 Turbo Tuner Secondary Clutch

STM Powersports Can-Am Maverick 1000 Tuner Secondary Clutch

CanAmSTM Powersports
Rating:
100%

The new triple roller option with a 1.25 diameter roller creates a very consistent smooth up shift and back shift with improved roller wear. This latest design creates a huge improvement in engine braking compared to the dual roller tuner. All billet construction can use compression springs with different spring rate options. STM has many helix angles available. STM offers custom helix angles, if you would like to customize, please contact us at, 706-318-0216.

 

SKU
stm-mav-3001018
$636.00
Free Shipping to the lower 48 US States
 

**Please contact us with question on which options to choose**

For 2014 models with the updated clutch housing cover you must use the 2014 Maverick Clutch Housing Flange with the secondary. The stock housing will not fit without it.

Choose a helix angle - The most popular helix is the 45°. It’s a good all-around helix. It works best for the average to aggressive trail rider.

Number of shims – The number of shims installed will determine your belt deflection or how tight the belt will be between your primary and driven clutch. Keep in mind when setting the deflection, it is for a stock belt. If you are installing this with a stock primary clutch or the new STM Rage Gen 2 with the smaller 1-way or 2-way bearing-choose 3 shims. If you are installing this with an older STM primary clutch with the larger 2-way bearing-choose 5 shims. The more shims you add the looser the belt, less shims tighter belt. NOTE: You want to have your belt as tight as possible without the bike creeping forward while in gear at idle.

Choose a post length - Choose the long post if you are running this with a stock primary OR choose the short post if you are installing it with an STM primary-recommended for optimal performance.

Choose a spring– The most popular spring for the stock Renegade and Outlander 800 is the PS7 yellow. This spring works well for most average to aggressive trail riders.

STM also offers the option of an encapsulated helix design that keeps the driven from unloading, opening and going into high gear during breaking and jumping which some racers require.

 Can be used along with the stock primary or the STM primary. Best results are acquired when running both the STM primary and STM tuner together.

2014 Maverick's will require an upgraded clutch housing flange adaptor for the inlet tube to allow installation of the STM clutch under the stock cover.

2015-2016 XMR models will require purchasing of a 2014 clutch housing cover from the dealer to clear the clutching.

Comes with a belt removal tool and bolt for installation.

 

More Information
Shop by Manufacturer CanAm
Shop by Brand STM Powersports
Write Your Own Review
You're reviewing:STM Powersports Can-Am Maverick 1000 Tuner Secondary Clutch
Your Rating
All items ship within 24-48 business hours or you will be contacted.  All shipments will arrive UPS or FedEx ground, select shipments will arrive USPS.  All shipments over $150.00 USD will be free to the lower 48 US States.
Returns accepted within 30 days of the original purchase receipt.  Any item shipped and not defect or have a mistake on our part will incur a restocking fee and cover return shipping.  The restocking fee would be deducted from your refund.
Search engine powered by ElasticSuite